Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#38521 - 13/09/2001 09:01 3.5" Harddisk
zanthos
new poster

Registered: 19/07/2001
Posts: 9
Loc: Switzerland
I don't have an EMPEG yet, but I'm interested if there is enough space inside to put in a 3.5" harddrive.
Has anyone ever tried to do something like that?

Thanks for your answers!

Andreas


Top
#38522 - 13/09/2001 09:07 Re: 3.5" Harddisk [Re: zanthos]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31597
Loc: Seattle, WA
No, it doesn't have room for a 3.5" hard disk.

It is, however, designed to accept two 2.5" hard disks.

There are even instructions in the FAQ section of this BBS on how to upgrade the hard disks yourself. At the current time, the biggest user upgrade was to install a pair of 48's in the unit for a total of 96 gigabytes of storage in the dash of your car. Mind boggling, isn't it?

Just out of curiosity, why is a 3.5" hard disk important? 2.5" hard disks are getting cheaper, and since they're designed for laptops, they are more rugged and better suited for mobile use.

___________
Tony Fabris
_________________________
Tony Fabris

Top
#38523 - 13/09/2001 09:39 Re: 3.5" Harddisk [Re: tfabris]
altman
carpal tunnel

Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
...also, there's no 12v psu to power a 3.5" disk. 2.5" drives run from 5v only. Don't ever connect a 3.5" disk to the car "12v" as car voltage can be anything from about 11v to 15v, with negative spikes of up to 200v...

Hugo



Top
#38524 - 14/09/2001 03:27 Re: 3.5" Harddisk [Re: altman]
muzza
Pooh-Bah

Registered: 21/07/1999
Posts: 1765
Loc: Brisbane, Queensland, Australi...
You know this from experience or is it just a warning?



Murray
I made a conscious descision in a semi-conscious state
_________________________
-- Murray I What part of 'no' don't you understand? Is it the 'N', or the 'Zero'?

Top
#38525 - 14/09/2001 04:29 Re: 3.5" Harddisk [Re: muzza]
altman
carpal tunnel

Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
Experience, this was why early mk2 empegs would shut down completely when the ignition was turned off instead of going into standby... (missing diode on accessory sense!)

Hugo



Top